Chennai
+917667887753
+919381438079

Continental - Germany Make V- Belts

Continental (ContiTech) V-Belts are engineered for industrial and automotive power transmission, manufactured to international standards (DIN, ISO, BS, SAE) with high-tensile polyester or aramid cords and heat-, oil-, and dust-resistant rubber compounds. General Technical Specifications • Operating Temperature Range. Standard wrapped belts operate between -55°C and +70°C, while raw-edge EPDM and multi-ribbed variants reach +80°C to +100°C depending on the model. • Electrical Conductivity. Antistatic in accordance with ISO 1813 (marked EL), safely dissipating electrostatic charges for use in hazardous/explosive atmospheres when machinery is grounded. • Environmental Resistance. Conditionally/moderately oil-resistant, ozone-resistant, dust-proof, and suitable for tropical climates. • Set Matching (L=L). Belts from 1, 000 mm upwards are manufactured to tight length tolerances (L=L system), allowing installation in multi-belt sets without manual measurement. • Construction Materials. Typically built with a natural rubber or EPDM body, low-stretch polyester or high-strength aramid tension members, and a protective fabric jacket (for wrapped profiles). Major Product Lines & Profiles Product Series Construction & Core Materials Applicable Standards Typical Profiles & Dimensions Primary Application CONTI-V® (Standard / Multiflex / Ultraflex) Wrapped fabric jacket, natural rubber, polyester cords DIN 2215 (Classical) DIN 7753 (Narrow) Classical: 10/Z to 40/E (425 mm – 13, 208 mm) Narrow: SPZ, SPA, SPB, SPC, 8V/25N (512 mm – 16, 500 mm) General machine engineering and standard industrial drives CONTI-V® Advance & Supreme Heavy-duty wrapped; Advance uses polyester cords, Supreme uses aramid cords DIN 7753 Narrow wedge profiles (SPZ, SPA, SPB, SPC) High-load, heavy-duty industrial power transmission CONTI-V® FO-Z / VX Advance Raw-edge, molded cogged design with EPDM rubber DIN 7753 / ISO 4184 XPZ, XPA, XPB, XPC; Classical AX, BX, CX High flexibility, small pulley diameters, and sustained high power CONTI-V® Torque Team Banded (multiple V-belts joined by a top tie-band); polyester or aramid cords DIN 2215 / DIN 7753 / RMA Multiple-ribbed classical, narrow, or raw-edge profiles Drives with severe shock loads, vibrations, or vertical shafts CONTI-V® MULTIRIB® (Poly-V) Multi-ribbed synthetic rubber with polyamide cover fabric and polyester cords DIN 7867 PH (1.60 mm rib pitch), PJ (2.34 mm), PK (3.56 mm), PL (4.70 mm), PM (9.40 mm) High gear ratios, high speeds (up to 60 m/s), and serpentine drives Automotive V-Belts Fiber-reinforced cogs, Vytacord/polyester tensile members SAE J636, SAE J1459 Top widths: 8/32“, 10/32“, 13/32“, 15/32“, 17/32“ (and metric AVX 10 / AVX 13) Alternators, water pumps, fans, and AC compressors MULTIRIB® (Poly-V) Dimensional Specs For multi-ribbed belt selection, Continental's technical catalog defines the following section parameters: • PH Section. 1.60 mm rib spacing, 2.7 mm belt height, 13 mm min. pulley diameter, 60 m/s max speed. • PJ Section. 2.34 mm rib spacing, 3.8 mm belt height, 20 mm min. pulley diameter, 60 m/s max speed. • PK Section. 3.56 mm rib spacing, 5.0 mm belt height, 45 mm min. pulley diameter, 50 m/s max speed. • PL Section. 4.70 mm rib spacing, 9.0 mm (or 7.5 mm) belt height, 75 mm min. pulley diameter, 40 m/s max speed. • PM Section. 9.40 mm rib spacing, 14.5 mm belt height, 180 mm min. pulley diameter, 35 m/s max speed. To give you the exact part number, cross-section dimensions, or pulley compatibility, let me know: • Application type (industrial machinery or specific vehicle make/model/year) • Belt profile or marking (e.g., A-section, SPB, XPA, 6PK, or existing belt code) • Required length (inside length Li, datum/pitch length Ld/Lw, or outside length La)
 2026-11-21T12:40:28

Keywords