Tiruchirappalli
08048035691

Products

product image
Flat Belts with Top Coating

Plain (flat) belts with a top sponge coating combine a smooth, non-toothed base belt with a compressible sponge rubber or foam layer to cushion, grip, and convey delicate items without marring. Typical Specifications • Base Belt Material: Flat rubber, rubber-nylon, PVC, polyurethane (PU), or fabric belts (typically starting from ~0.8 mm thick). • Top Sponge / Foam Coating: Sponge rubber, PU sponge/foam, or closed-cell foam (including FDA-grade white sponge for food/packaging). • Coating Thickness: Commonly 1 mm to 20 mm depending on application and supplier (standard stock options often include 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, or 15 mm). • Hardness: Typically 30°–50° Shore A (with some rubber/sponge ranges extending up to 60° Shore A). • Surface & Finish Options: Bare sponge, top-cloth/fabric skin (such as woven cloth, lycra, or silicone-treated covers for higher wear and tear resistance), or cross-cuts/grooves for conformity. • Dimensions: Custom widths and lengths/endless loops to match conveyor or feeder frames.

product image
Timing Belts with Top Coating

Polyurethane (PU) timing belts with a top silicone coating combine the precise power transmission and wear resistance of a toothed PU belt with higher surface grip, lower noise, and better heat or chemical resistance on the back side. Key Specifications • Base Belt Material: Thermoplastic polyurethane (PU), typically around 70–90 Shore A hardness, with steel, Kevlar/aramid, or fiberglass tension cords. • Common Tooth Profiles: Metric profiles (such as T2.5, T5, T10, T20, AT5, AT10, AT20), imperial profiles (XL, L, H, XH), and curvilinear profiles (such as HTD). • Silicone Coating Thickness: Typically ranges from 0.5 mm to 12 mm depending on the manufacturer and conveyor/grip requirement (commonly 1.5 mm to 10 mm on standard custom belts). • Coating Hardness: Often softer than the PU base (for example, around 35–40 Shore A) to increase surface friction, cushioning, and anti-slip grip. • Temperature Resistance: Uncoated standard PU belts generally operate around -30°C to +80°C, whereas specialized silicone formulations can extend high-temperature tolerance up to 100°C–250°C depending on the exact compound and construction.

product image
Megadyne PU Timing Belts

Megadyne polyurethane (PU) timing belts—including the MEGAPOWER, MEGAFLEX, and MEGALINEAR series—are synchronous power transmission and linear motion belts available in thermoset (88 ShA) or thermoplastic (92 ShA) polyurethane reinforced with steel or Kevlar cords. Key Specifications by Series • MEGAPOWER / MEGAPOWER 2 (Endless Molded PU): Grey/green thermoset polyurethane (88 ShA) with standard zinc-coated steel or optional Kevlar, fiberglass, or stainless steel cords. Operates from -25°C to +80°C at speeds up to 20 m/s. Common profiles include T2, T2.5, MXL, XL, L, and H (with T/AT aligning with ISO 17396). • MEGAFLEX (Truly Endless PU): White thermoplastic polyurethane (92 ShA) with continuous spiral steel or optional Kevlar/stainless steel cords. Supports speeds up to 10,000 RPM and 20 m/s across temperatures from -25°C to +80°C. Features a wide range of profiles including XL, L, H, T-series, AT-series, and RPP variants. • MEGALINEAR (Open-End & Jointed PU): White thermoplastic polyurethane (92 ShA) reinforced with parallel steel, Kevlar, or stainless steel cords. Built for high linear motion drives with speeds up to 70 m/s and temperatures from -30°C to +80°C. Available in extensive metric, imperial, and specialized profiles. General Construction & Options • Performance & Resistance: High resistance to abrasion, low elongation, and strong tolerance to oils, greases, ozone, and hydrolysis. • Add-ons: Optional nylon tooth or back facings and custom backing thicknesses for specific conveying applications. For detailed engineering catalogs and dimensions, consult official resources such as the Megadyne MEGALINEAR page, the Megadyne MEGALINEAR Brochure, the Megadyne Product Guide, or regional distributors like Pratham International. Please share the tooth profile and pitch (such as T5, AT10, or RPP8), belt length or tooth count, belt width, and cord material (steel or Kevlar) so I can provide exact dimensions or part details. • Megadyne

product image
Continental V- Belts- Dealers Anjaneya Beltings, Chennai

Continental (ContiTech) V-Belts are engineered for industrial and automotive power transmission, manufactured to international standards (DIN, ISO, BS, SAE) with high-tensile polyester or aramid cords and heat-, oil-, and dust-resistant rubber compounds. General Technical Specifications • Operating Temperature Range. Standard wrapped belts operate between -55°C and +70°C, while raw-edge EPDM and multi-ribbed variants reach +80°C to +100°C depending on the model. • Electrical Conductivity. Antistatic in accordance with ISO 1813 (marked EL), safely dissipating electrostatic charges for use in hazardous/explosive atmospheres when machinery is grounded. • Environmental Resistance. Conditionally/moderately oil-resistant, ozone-resistant, dust-proof, and suitable for tropical climates. • Set Matching (L=L). Belts from 1,000 mm upwards are manufactured to tight length tolerances (L=L system), allowing installation in multi-belt sets without manual measurement. • Construction Materials. Typically built with a natural rubber or EPDM body, low-stretch polyester or high-strength aramid tension members, and a protective fabric jacket (for wrapped profiles). Major Product Lines & Profiles Product Series Construction & Core Materials Applicable Standards Typical Profiles & Dimensions Primary Application CONTI-V® (Standard / Multiflex / Ultraflex) Wrapped fabric jacket, natural rubber, polyester cords DIN 2215 (Classical) DIN 7753 (Narrow) Classical: 10/Z to 40/E (425 mm – 13,208 mm) Narrow: SPZ, SPA, SPB, SPC, 8V/25N (512 mm – 16,500 mm) General machine engineering and standard industrial drives CONTI-V® Advance & Supreme Heavy-duty wrapped; Advance uses polyester cords, Supreme uses aramid cords DIN 7753 Narrow wedge profiles (SPZ, SPA, SPB, SPC) High-load, heavy-duty industrial power transmission CONTI-V® FO-Z / VX Advance Raw-edge, molded cogged design with EPDM rubber DIN 7753 / ISO 4184 XPZ, XPA, XPB, XPC; Classical AX, BX, CX High flexibility, small pulley diameters, and sustained high power CONTI-V® Torque Team Banded (multiple V-belts joined by a top tie-band); polyester or aramid cords DIN 2215 / DIN 7753 / RMA Multiple-ribbed classical, narrow, or raw-edge profiles Drives with severe shock loads, vibrations, or vertical shafts CONTI-V® MULTIRIB® (Poly-V) Multi-ribbed synthetic rubber with polyamide cover fabric and polyester cords DIN 7867 PH (1.60 mm rib pitch), PJ (2.34 mm), PK (3.56 mm), PL (4.70 mm), PM (9.40 mm) High gear ratios, high speeds (up to 60 m/s), and serpentine drives Automotive V-Belts Fiber-reinforced cogs, Vytacord/polyester tensile members SAE J636, SAE J1459 Top widths: 8/32“, 10/32“, 13/32“, 15/32“, 17/32“ (and metric AVX 10 / AVX 13) Alternators, water pumps, fans, and AC compressors MULTIRIB® (Poly-V) Dimensional Specs For multi-ribbed belt selection, Continental's technical catalog defines the following section parameters: • PH Section. 1.60 mm rib spacing, 2.7 mm belt height, 13 mm min. pulley diameter, 60 m/s max speed. • PJ Section. 2.34 mm rib spacing, 3.8 mm belt height, 20 mm min. pulley diameter, 60 m/s max speed. • PK Section. 3.56 mm rib spacing, 5.0 mm belt height, 45 mm min. pulley diameter, 50 m/s max speed. • PL Section. 4.70 mm rib spacing, 9.0 mm (or 7.5 mm) belt height, 75 mm min. pulley diameter, 40 m/s max speed. • PM Section. 9.40 mm rib spacing, 14.5 mm belt height, 180 mm min. pulley diameter, 35 m/s max speed. To give you the exact part number, cross-section dimensions, or pulley compatibility, let me know: • Application type (industrial machinery or specific vehicle make/model/year) • Belt profile or marking (e.g., A-section, SPB, XPA, 6PK, or existing belt code) • Required length (inside length Li, datum/pitch length Ld/Lw, or outside length La)

product image
Flexco- USA Make Fasteners - Dealers Anjaneya Beltings

Flexco conveyor belt fasteners are engineered for heavy-duty and light-to-medium industrial splicing, with specifications varying by fastener style (bolt solid plate, bolt hinged, or rivet hinged) and series. Flexco Bolt Solid Plate Fastening System Per Flexco, bolt solid plate fasteners create a sift-free splice designed for bulk materials like sand, gravel, crushed stone, and cement: • Overall System Range: 150 to 620 PIW (260 to 1,080 kN/m) mechanical fastener rating; belts 3/16“ to 2“ (5 mm to 50 mm) thick; pulley diameters from 12“ to 48“ (300 mm to 1,220 mm). • Size 1: Up to 150 PIW (260 kN/m) rating; belt thickness 3/16“–7/16“ (5–11 mm); minimum pulley diameter 12“ (300 mm) at 75–100% operating tension. • Size 140 / 140VP: Up to 225 PIW (400 kN/m) rating; belt thickness 3/16“–7/16“ (5–11 mm); minimum pulley diameter 14“ (350 mm) at 75–100% operating tension. • Size 2: Up to 620 PIW (105 kN/m) max rating; belt thickness 9/16“–1-3/16“ (14–30 mm); minimum pulley diameter 36“ (920 mm); available in belt widths from 12“ to 72“ (300–1,800 mm). • Metals & Installation: Available in steel, stainless steel, MegAlloy, and Everdur; installed with piloted bolts using templets and hand or power tools. Flexco Bolt Hinged Fastening System Per Flexco, bolt hinged fasteners allow quick joint separation by removing the hinge pin and suit smaller pulleys: • Overall System Range: 190 to 300 PIW (33–52 kN/m) mechanical fastener rating; belts 1/4“ to 5/8“ (6 mm to 16 mm) thick; pulley diameters from 6“ to 9“ (150 mm to 225 mm). • Size 375X: Up to 190 PIW (33 kN/m) rating; belt thickness 1/4“–13/32“ (6–11 mm); minimum pulley diameter 6“ (152 mm) under 100% operating tension. • Size 550: Up to 300 PIW (52 kN/m) rating; belt thickness 1/4“–5/8“ (6–16 mm); minimum pulley diameter 9“ (230 mm) under 100% operating tension; belt widths 18“–72“ (450–1,800 mm). Flexco Rivet Hinged Fastening System Per Flexco product specifications, rivet hinged fasteners use staggered rivet patterns and scalloped edges for hinged splicing: • Size R2: Up to 330 PIW (60 kN/m); two-teeth/two-rivet pattern; belt thickness 1/8“–3/8“ (3–10 mm); minimum pulley diameter 5“ (125 mm); belt widths 12“–60“ (300–1,500 mm); available in steel, stainless steel, and MegAlloy. • Size R5: Up to 450 PIW (79 kN/m); staggered five-rivet pattern; belt thickness 7/32“–7/16“ (6–11 mm); minimum pulley diameter 9“ (230 mm); belt widths 18“–72“ (450–1,800 mm); available in steel, Type 316 stainless steel, MegAlloy, and RustAlloy (Type 400 stainless). • Size R8: Up to 1,500 PIW (263 kN/m); staggered eight-rivet pattern; belt thickness 13/32“–11/16“ (10.5–17 mm); minimum pulley diameter 18“ (450 mm); belt widths 48“–84“ (1,200–2,130 mm); RustAlloy plates with steel or stainless steel rivets. Please share the specific fastener series/size, belt thickness, belt width, minimum pulley diameter, and operating tension (PIW or kN/m) so I can narrow down exact model options and documentation.

product image
Nitta Japan Make Belts - Dealers Anjaneya Beltings, Chennai

Nitta PolyBelt flat power transmission and conveying belts pair a high-tensile polyamide (PA) core with abrasion-resistant NBR synthetic rubber covers, supporting speeds up to 70 m/s and antistatic properties (≤ 500 V). Details are available in the Nitta PolyBelt Catalog and on the Nitta PolyBelt Page. General Construction & Performance • Tension Member: High-tensile polyamide (PA / nylon) film or fabric core built for shock loads and low elongation. • Cover Material: Abrasion- and oil-resistant NBR (nitrile butadiene rubber) or soft NBR on top/bottom surfaces. • Operating Speed: Up to 50–70 m/s depending on belt series and drive setup. • Operating Temperature: Typically -20°C to +80°C. • Antistatic Rating: ≤ 500 V to prevent static charge build-up. • Joining: Skived endless joining on-site or factory-made endless loops. Sample Model Specifications • M-2000: 4.0 mm thickness, 30.0 N/mm specific tension at 2% elongation, 200 mm minimum pulley diameter (fans, pumps, spinning frames, cardboard/paper machinery). • H-500: 3.5 mm thickness, 7.5 N/mm specific tension at 2% elongation, 50 mm minimum pulley diameter (tangential drives, generators/blowers, conveyors). • H-750: 3.75 mm thickness, 11.2 N/mm specific tension at 2% elongation, 75 mm minimum pulley diameter. • H-1500: 4.5 mm thickness, 22.5 N/mm specific tension at 2% elongation, 150 mm minimum pulley diameter. • TFL-6S to TFL-18S: 2.25 mm to 3.35 mm thickness, 11.5 to 34.0 N/mm specific tension at 2% elongation, 60 mm to 175 mm minimum pulley diameter (low-noise tangential drives and roller conveyors). • XH-3S-3 / XH-3S-4 / XH-3S-6: 2.85–3.0 mm, 3.85–4.0 mm, and 5.85–6.0 mm thicknesses, 3.4 N/mm tension at 1% elongation, 50 mm, 60 mm, and 80 mm minimum pulley diameters (folder gluers and paper/cardboard handling). Restrictions & Series Coverage • Product Series: Includes SG, L, M, H, MH, TFL, XH, CBX-7S, CBE-20, CBG-7S, NRT, RT, IRTA, KCS, and TTA/TTB/GLTB/GMTB/TW/TWH variants. • Safety Prohibitions: Not approved for hoisting loads, conveying unpackaged food, or incineration. If you share: • The exact belt series or model code (for example, M-2000, H-1500, or XH-3S) • Your required width, thickness, or pulley diameter • The application or machinery type I can verify the exact rating, tension, and compatibility details for your setup.

product image
100% Nylon Lifting Belts- Mfrs. Anjaneya Beltings

Forging hammer lifting belts are heavy-duty flat or link belts—typically made of woven nylon, nylon-cotton, or nylon-polyester—designed to lift the tup (hammer head) on belt drop hammers and gravity drop forging machines.

product image
Truly Endless Woven Belts

Truly endless woven biscuit conveyor belts are seamless, jointless belts woven in a continuous loop to prevent splice failure, ensure uniform thickness, and support smooth dough transfer or cooling in biscuit lines. Key Specifications & Variations • Construction & Seam: Truly endless woven loop with no mechanical or glued splice joint, providing uniform thickness and smooth operation over small rollers or knife edges. • Carcass & Yarn Materials: Polyamide (nylon), cotton, polyester, flax, or wool, depending on the bakery stage (dough molding, cutting, oven take-off, or cooling). For example, Biscuit People lists a 2.0 mm polyamide endless conveyor band with 24 warp threads per cm for rotary and cutting biscuit processes. • Thickness: Commonly 1.5 mm to 3.0 mm for biscuit molding, drying, and cooling belts (around 2.0 mm for standard polyamide and canvas biscuit belts), though heavy-duty industrial endless belts can be thicker. • Width & Length: Widths typically range from roughly 30 to 65 inches (up to ~1,650 mm) on standard bakery canvas variants, with lengths customized to conveyor center distances. • Operating Temperature: Ranges widely by material and coating—around 100°C for basic cotton/nylon bakery webs, over 110°C (230°F+) for oven take-off applications, and up to 280°C–350°C for specialized high-temperature synthetic/aramid/coated endless woven belts. • Surface & Coatings: Available uncoated (absorbent for dough/oil handling) or finished with food-grade PU (polyurethane), PVC, or silicone coatings/impregnations, plus optional bottom tracking guides such as V-profiles. Application Notes by Line Stage • Molding & Cutting: Smooth, low-stretch, or food-grade coated/polyamide weaves help release dough cleanly without seam marks. • Oven Take-Off: Requires heat and baking-oil resistance plus flexibility around small nose rollers. • Cooling & Transfer: Multi-layer cotton or woven belts handle moisture dissipation and continuous product transport. Please share your belt width and length, target thickness, operating temperature, and conveyor stage (molding, oven take-off, or cooling) so I can narrow down exact material and coating specs.

product image
PU Cleated Sidewall Belts

PU (polyurethane) cleated conveyor belts use high-frequency welded or molded cleats on a PU or TPU base belt to prevent product roll-back on inclines. Standard specifications vary by manufacturer and duty level, typically spanning 0.7 mm to 3mm in belt thickness, 1 to 4 plies, widths up to 3,000–3,200 mm, and operating temperatures generally between -30°C and +80°C (with specialty variants extending wider).

product image
Volta Make PU Round Belts - Dealers Anjaneya Beltings

Volta Make PU Ropes (officially classified as Volta Polyurethane Round Profiles/Belts) are extruded thermoplastic polyurethane (TPE/PU) cords engineered for conveying and light-to-medium power transmission. They are manufactured in both solid and hollow variants, with smooth or textured (rough) finishes, and optional internal reinforcement. Core General Specifications • Material Composition. Homogeneous Thermoplastic Polyurethane (TPE/PU). • Standard Diameters. 2 mm to 20 mm (up to 25 mm for select specialized profiles). • Hardness Range. 72 Shore A to 100 Shore A (63 Shore D), with 83A, 88A, and 90A being the most common industrial grades. • Operating Temperature. -40°C to +80°C (varies slightly by specific polymer grade). • Surface Finish. Smooth (low friction) or Rough/Textured (high grip). • Construction Options. Solid unreinforced, Hollow (for mechanical pin/connector joining), and Reinforced (polyester/aramid cord for low-stretch, high-load applications). • Joining Method. Heat butt-welded on-site into endless loops, or mechanically joined using metal/plastic connectors (for hollow profiles). • Certifications. Select food-grade series (such as Blue, Orange, and Clear/Transparent grades) are FDA, EU, and USDA certified for direct food contact. Common Series Comparison Series Code Color & Finish Hardness Temp. Range CoF (Steel) Key Characteristics Volta RPN Green (Rough/Textured) 88 Shore A -30°C to 80°C 0.38 µ Standard industrial workhorse; high abrasion resistance. Volta RPB Solid Blue (Textured) 88 Shore A -30°C to 80°C 0.38 µ FDA/USDA approved for food handling and packaging. Volta RO Orange (Smooth) 83 Shore A -40°C to 55°C 0.55 µ High elasticity and grip; FDA compliant. Volta RM Red (Smooth/Rough) ~85–90 Shore A -30°C to 80°C ~0.40–0.50 µ High-tensile general conveying and roller drives. Volta Clear Transparent (Smooth) ~80–85 Shore A -30°C to 80°C ~0.50 µ Non-marking; used in canning, electronics, and cleanrooms. Reference Dimensional & Load Data (Volta RPN Series) To aid in pulley sizing and tensioning, below are the standard mechanical limits for the popular RPN (Green Textured) series: • 3 mm Diameter. Min. pulley diameter: 29 mm | Max. working load: ~1.9 kg • 5 mm Diameter. Min. pulley diameter: 48 mm | Max. working load: ~5.3 kg • 8 mm Diameter. Min. pulley diameter: 76 mm | Max. working load: ~13.6 kg • 10 mm Diameter. Min. pulley diameter: 95 mm | Max. working load: ~21.0 kg • 12 mm Diameter. Min. pulley diameter: 114 mm | Max. working load: ~30.5 kg • 15 mm Diameter. Min. pulley diameter: 143 mm | Max. working load: ~47.5 kg (Note: Pull force ratings apply to dry grooved steel/aluminum pulleys; multiply values by 0.7 for wet operating conditions.) To give you the exact datasheet numbers (pull force, weight per meter, and pretension limits), could you share: • The exact diameter (e.g., 6 mm, 8 mm, 12 mm) • The color or series code (e.g., Green RPN, Blue RPB, Orange RO, or Reinforced) • Your application (e.g., food conveying, live-roller drive, or ceramic line)

product image
Gates Make Timing Belts - Dealers Anjaneya Beltings, Chennai

ates polyurethane (PU / TPU) steel-cord timing belts—primarily offered under the Synchro-Power™ Linear and endless/open-ended TPU lines—combine abrasion-resistant polyurethane with parallel steel or stainless steel tensile cords for low stretch, high stiffness, and precision positioning. Core Material & Construction Specifications • Belt Body Material: Thermoplastic polyurethane (TPU) with typical hardness of 84–92 Shore A, offering resistance to oils, chemicals, water, cuts, and abrasion. • Tensile Cord: High-tensile steel or stainless steel cords (BSL, SL, HF, RSL, RHF, NIRO designations in the 2025 Gates EMEA TPU Catalogue; aramid/Kevlar options are also available). Parallel cord alignment prevents edge exposure and supports uniform tensioning. • Construction Styles: Open-ended (extruded long lengths), welded endless, and truly endless sleeves/profiles. • Operating Temperature: Standard TPU ratings span -5°C to +70°C on the Synchro-Power™ Linear product page, and -30°C to +75°C (with low-temperature resins down to -30°C or -50°C depending on grade) in the 2025 Gates EMEA TPU Catalogue. • Surface & Tracking Options: Optional polyamide/nylon tooth or back facings (NT, NB, NTB, AS) for reduced friction and lower noise, V-guides (K6, K13, O/A-section) for self-tracking, water-resistant (WR) cord encapsulation, and FDA/EU food-contact or REACH-compliant grades. Available Profiles & Tooth Pitches According to the 2025 Gates EMEA TPU Catalogue, Gates supplies steel-cord PU timing and linear belts across several profiles: • T Series: T2.5, T5, T10, T20 • AT & ATL Series: AT5, AT10, AT20, ATL5, ATL10, ATL20 • HTD & HTDL Series: HTD5, HTD8, HTD14, HTDL8, HTDL14 • Specialty & Imperial Profiles: HPL (HPL3, HPL5, HPL8), STD (STD5, STD8), GPP (GPP8, GPP14), SST8, Imperial (XL, L, H, XH), Flat (F20, F30, F48), and Wide belts (WT5, WT10, WH, GMT3, WHTD8M, WSTD8, CC8). Example Dimensions & Tolerances • Sample Steel-Cord Belt Specs: Per Acorn Industrial Services listings for Gates Synchro-Power PU steel-cord belts, a T5-850-16 belt has a 5 mm pitch, 850 mm pitch length, 16 mm width, 170 teeth, and 0.029 kg weight; a T5-460-75 belt has a 5 mm pitch, 460 mm pitch length, 75 mm width, 92 teeth, and 0.072 kg weight. • Catalog Tolerances (Metric / Welded Examples): The Gates Polyurethane Belt Program catalog lists ±0.5 mm width tolerance up to 50 mm width, ±0.75 mm for widths over 50 mm, ±1% on 100 m standard rolls, and a 480 mm minimum welded belt length for 5 mm pitch reference entries. Please share the specific tooth profile/pitch (such as T5, AT10, or HTD8M), belt length or number of teeth, width, and construction type (open-ended vs. welded/endless) you need so I can narrow down exact part numbers and tolerances.

product image
Gates Make Timing Belts - Dealers Anjaneya Beltings, Chennai

Gates Poly Chain GT Carbon belts are high-load synchronous belts built with a polyurethane body, carbon fiber tensile cords, and nylon tooth facing, designed for high-torque drives and roller chain replacements. Key Specifications • Construction: Polyurethane body, carbon fiber tensile cords, nylon fabric tooth facing, and a curvilinear GT tooth profile. • Standard Pitches: 8 mm (8MGT) and 14 mm (14MGT). • Pitch / Stock Lengths: 640–4480 mm for 8 mm pitch; 994–4410 mm for 14 mm pitch (with extended lengths and profiles available depending on series/application). • Operating Temperature: -54°C to +85°C (-65°F to +185°F). • Maximum Belt Speed: Up to 6,500 fpm. • Sprocket Compatibility: Designed to run with Poly Chain GT2 / Poly Chain GT sprockets. • Maintenance & Resistance: Lubrication-free and re-tensioning-free operation; resists oil, chemicals, abrasion, and corrosion. For full design parameters and part listings, see Gates Corporation and the Poly Chain GT Carbon Belt Drive Systems manual. If you share the pitch (8MGT or 14MGT), belt length or tooth count, belt width, and application, I can help narrow down the right part specifications or sprocket compatibility. gates.co Poly Chain GT Carbon Belt Drive Systems Poly Chain GT Carbon Belt Drives: * Pitches: 8mm, 14mm * Stock lengths: 640-4480mm (8mm), 994-4410mm (14mm) * Max speed: 6500 fpm ... gates.co Poly Chain® GT™ Carbon™ Belts | Gates Corporation # EXPLORE NEW PRODUCTS * Industries * Services Gates Global Oil & Gas * Knowledge Centre * About Us # Poly Chain® GT™ Carbon™ Belt... BSC Industries Poly Chain® GT® Carbon™ Belts Poly Chain GT Carbon Belts: Polyurethane body, carbon tensile cord, nylon tooth facing, curvilinear tooth profile; operational -65... YouTube·Gates 14s Convert to Gates Poly Chain GT Carbon gmbelting.com.au Poly Chain GT Carbon Belts | Gates 8MGT & 14MGT Poly Chain GT Carbon belts. Ultra high transmission strength; Minimal elongation; Maintenance free & no lubrication; 99% transmiss... www.transovate.tech Gates Poly Chain GT Carbon: 8 Essential Specs # Standard Industrial Belt Specifications The following specifications summarize the standard Gates Poly Chain GT Carbon endless b...

Subcategory Tags

timingbeltsinchennai timingbeltsinpune timingbeltsinvishakhapatnam timingbeltsinvijayawada timingbeltsinbangalore timingbeltsincoimbatore timingbeltsinguntur timingbeltsinmumbai Treadmill Belts Jogger Belts Running Belt Modular Belt Suppliers In India Modular Belt Manufacturers In Chennai Modular Belt Manufacturers In Coimbatore Cap Elevator Chains In Hyderabad Cap Elevator Chains In Bangalore Banded V belts V belts Fenner V belts Pix V belts Contitech V belts Mitsuboshi V Belts Swr V Belts Opti V belts Cogged V belts conveyor belt supplier Sricity Ceramic Industry Belts In Chennai Tiles Industry Belts Granite Polishing Machine Belts Food grade conveyor belts Teflon Conveyor belts PU Conveyor Belts PVC conveyor belts White Conveyor Belts Silicon Conveyor belts Logistics Industry Belt Puncture Resistant Belt Pvk Conveyor Belt Polyester Mesh Belts Nylon Mesh Belts Dryer Mesh Belt Modular Conveyor Belt Curve Type Packing Machine Belts PVC Conveyor Belts In India Rough Top Conveyor Belts Loading Conveyor Belt Grip Conveyor Belt Food Industry Belt PU Timing Belts Megadyne Contitech Mitsuboshi Timing Belts Conveyor Belts For Food And Beverage Industry Food Conveyor Belt Caterpillar Conveyor Belt Confectionery Industry Belt Enrober Conveyor Belt Pizza Oven Conveyor Belt cleatedsidewallconveyorbelt PVC Conveyor Belts Conveyor Belt In Chennai Special Purpose Conveyor Belt Sponge Conveyor Belt Conveyor Belts In Chennai Spinning Mill Belts Tobacco Industry Belts Lifting Belts Nylon Ropes
Phone Number

08048035691

Please keep 0 before dialling the number.

Mon-Thu: 10 AM - 2 PM • Fri: 3 PM - 7AM

Address Tiruchirappalli , Tiruchirappalli , Tamil Nadu

Tiruchirappalli, India, 620001