Tiruchirappalli
08048035691

Nitta Japan Make Poly Belts

Nitta PolyBelt flat power transmission and conveying belts pair a high-tensile polyamide (PA) core with abrasion-resistant NBR synthetic rubber covers, supporting speeds up to 70 m/s and antistatic properties (≤ 500 V). Details are available in the Nitta PolyBelt Catalog and on the Nitta PolyBelt Page. General Construction & Performance • Tension Member: High-tensile polyamide (PA / nylon) film or fabric core built for shock loads and low elongation. • Cover Material: Abrasion- and oil-resistant NBR (nitrile butadiene rubber) or soft NBR on top/bottom surfaces. • Operating Speed: Up to 50–70 m/s depending on belt series and drive setup. • Operating Temperature: Typically -20°C to +80°C. • Antistatic Rating: ≤ 500 V to prevent static charge build-up. • Joining: Skived endless joining on-site or factory-made endless loops. Sample Model Specifications • M-2000: 4.0 mm thickness, 30.0 N/mm specific tension at 2% elongation, 200 mm minimum pulley diameter (fans, pumps, spinning frames, cardboard/paper machinery). • H-500: 3.5 mm thickness, 7.5 N/mm specific tension at 2% elongation, 50 mm minimum pulley diameter (tangential drives, generators/blowers, conveyors). • H-750: 3.75 mm thickness, 11.2 N/mm specific tension at 2% elongation, 75 mm minimum pulley diameter. • H-1500: 4.5 mm thickness, 22.5 N/mm specific tension at 2% elongation, 150 mm minimum pulley diameter. • TFL-6S to TFL-18S: 2.25 mm to 3.35 mm thickness, 11.5 to 34.0 N/mm specific tension at 2% elongation, 60 mm to 175 mm minimum pulley diameter (low-noise tangential drives and roller conveyors). • XH-3S-3 / XH-3S-4 / XH-3S-6: 2.85–3.0 mm, 3.85–4.0 mm, and 5.85–6.0 mm thicknesses, 3.4 N/mm tension at 1% elongation, 50 mm, 60 mm, and 80 mm minimum pulley diameters (folder gluers and paper/cardboard handling). Restrictions & Series Coverage • Product Series: Includes SG, L, M, H, MH, TFL, XH, CBX-7S, CBE-20, CBG-7S, NRT, RT, IRTA, KCS, and TTA/TTB/GLTB/GMTB/TW/TWH variants. • Safety Prohibitions: Not approved for hoisting loads, conveying unpackaged food, or incineration. If you share: • The exact belt series or model code (for example, M-2000, H-1500, or XH-3S) • Your required width, thickness, or pulley diameter • The application or machinery type I can verify the exact rating, tension, and compatibility details for your setup.
 2026-11-21T12:20:44

Keywords